-
How To Use High Pressure Homogenizer, Lab Homogenizer Supplier
Homogeneous process is through plunger pump and homogeneous valve working together, make the material refining and uniform mixing in homogeneous valve area.
-
TOPTION brand homogenizer working principle:
Material through the plunger pump suction and inflating, under the function of plunger into the valve group whose pressure can be adjusted, through a certain width current limiting aperture (workspace), material loss of pressure moment and with extremely high flow speed spray out (1000-1500 m/s), collision on collision ring which is one of the valve components, produced three effects:
1.Void effect – Compressed by plunger accumulated a high energy within the material, when through the current limiting crack moment loss pressure, cause hole explosion by high energy release, finally make material crushing & refining strongly.
2.Impacting effect – Materials when through the current limiting gap with high speed impact to tailor-made collision ring, cause material crushing.
3.Shear effect – High-speed material when through the valve cavity channel and current limiting aperture will produce strong shear.
-
How to use high pressure homogenizer machine?
1.Add water to the hopper and turn on the machine.
2.Adjust the homogeneous pressure to the required working pressure.
3.When the water flows to the bottom of the hopper, add the material to the hopper.
4.In the process of homogenization of the machine, the operator should always pay attention to the amount of material in the hopper, timely feeding, circulation or ready to step down.
5.After homogenization, discharge the material in the quipment, when the material in the hopper is going to be depleted please add some water in the hopper.
6.Adjust the pressure to zero and clean as needed.
7.Turn the switch counterclockwise and turn it off.
-
Want to learn more about high pressure homogenizer, welcome contact [email protected]
to customize.
