RE-52AA 1L Laboratory Vacuum Evaporator, Rotary Evaporator

Description

Descritption

• TOPTION RE-52AA 1L rotary evaporator lab small type evaporation machine is suitable for chemistry laboratory, modern organic laboratory, university teaching, to remove solvent from samples by evaporation. Automatic lifting type and manual lifting economical type are optional, matched vacuum pump, chillers are available, if you need larger types, TOPTION provide wide capacity range from 1L 2L 3L 5L 10L 20L 30L 50L 100L lab pilot industry various types.

  
  

• 
• 

• 
  

  Ordinary rotavapor operating problems include evaporation speed is slow? vaporized solvent cannot be well collected? Sudden bumping destroys everything you collected? Trouble again on vacuum pump. Awful smell aroud in lab? etc. 

  
  

  Please check the differences after using TOPTION rotary evaporation set.

  1. Three types condensers available for different operation requirements. Standard condenser for normal use. Cold trap type for low boiling point solvent condensing. etc.

  
  

  2. PTFE sleeve inside taper joint helps to prevent dead seizure, and increase sealing performance.

  
  

  3. Taper joint lock and release device design.

  
  

  4. Automatic lifting heating bath, prevents movement of glassware like evaporation flask is safe and easy to operate.

  
  

  5. Lid for water bath, which can increase evaporation efficiently by 15% and save bath water by 60%. Also could protect operators, which is safe and useful.

  
  

  6. Anti-corrosion and wearable sealing system, which are specially designed and precisely manufactured. 90% users don’t need to replace rotary seal in one year.

  
  

  7. Laboratory vacuum evaporator whole set customization, include chillers, vacuum pump, vacuum controller.

• 1L rotary eavporator technical parameters

  Relevant model	RE-52AA 1L rotary evaporator
  Rotating flask	0.5L
  Optional Rotating Flask	0.1L, 0.25L, 1L or 2L
  Receiving Flask	0.5L
  Lifting Type	Automatic lifting
  Condenser	Vertical type
  Rotation Speed	0 – 150
  Evaporating Speed	1.2 L/h H2O
  Reachable Vacuum Rate	Vacuum pump is available,  < 133Pa (1.33mbar, 1 Torr)
  Bath Power	1.1 KW
  Staic Temp. Control Range & Wave	RT-99 + – 2 celsius degree
  Power	220V 50/60Hz

  
  

  Basic configuration of RE-52AA laboratory type rota evaporation machine

  Relevant Model	RE-52AA rotary evaporator
  Charging Valve	Glass
  PTFE Discharge Valve	PTFE
  PTFE Rotary Seal Assembly	Have
  Overall Flange Joints	Have
  Taper Joint PTFE Sleeve	Have
  Frequency Conversion Speed Control	Have
  Vacuum Meter	Have
  Throttle Valve For Vacuum	Have
  Thermometer Neck For Vapor	Optional
  Continuous Receiving	Have
  Digital Display	Bath temperature
  Evaporating Flask Unload Handler	Optional
  Ex-proof Motor	Optional
  Cold Trap Protection System	Optional
  Bumping System	Have
  Optional Evaporating Flask (baffles available at request)	1L 2L

• 
• 
• 
• 
• 
• 
•